If you opt for purchasing steel bars from steel distributors, here are some tips to follow to get the right steel bar for your application.Before you proceed on sending a free quotation of your required steel bar, there are certain things you have to consider on how to get the right product fitted for your designated application. Steel materials may come with both simple forms and shapes, but they can come fully complicated and complex in terms of the right grade, finish, and condition. Some steel bar grades may not be well enough in a particular application, and some may be just right for all types of environments.
UsageFirst and foremost, consider the kind of application you planned for. Certain steel grades or shapes have each of their own designated uses and well-suited environment. The best grades play the most in highly severe environments like aerospace, automotive, marine, chemical processing, and even in medical applications. Would you require steels for high performance application, or for ordinary use only?
Grade & propertiesSteels have different grades and physical and mechanical properties specially suitable for specific environments. Do you require your bars to have good strength, display corrosion resistance, and withstand wear? It would be best for us to know what specific grade you require, like 303L stainless steel, or duplex bar, or 17-4PH round bar.
Shape & sizesNot all grades desired are obtained in all product sizes. Mostly, all forms and possible steel bar sizes can made from austenitic stainless steel. It is important to include your desired shapes so we can work on providing you the required product shape and the grade you need. We can also do finishing operation as per customer requirement.
Bar conditionWhatever your application is, it is important to know if your steel bar should be annealed or normalized. Other manufacturers may require products to meet certain standards and specifications like ISO 9001:2008 certified, ASTM or AMS. The best thing about AGS is that we keep our products to the highest quality with consistent Quality Inspection implemented in every end phase of our operations.
FinishWhatever finish you look for, bars should be cleanly rolled to the sections and dimensions. The bars should be free from laminations, imperfect edges, surface flaws, roughness, cracks, and any other defects. Either you look for turned, ground, or polished (TG&P) bars, hot rolled or cold finished, we make sure our bars are consistently produced with 0% error while checking if they are on their standard weight and length.
QualitySteel bars or any products you buy must be of high quality. Either looking for a full pump shaft or bearing shaft quality in bars, we have them all available for you in a wide range of sizes and lengths.
Primary or secondary steel?As you opt for purchasing steel products, you also have to check the type of steel material. In the market, there are two available steel types: primary steel and secondary steel. Primary steel is a virgin steel made from iron ore while secondary steel is the recycled steel made from steel/metal scrap. Some old steels are rebarred to be used for another application.
Length & QuantityFor us to work on your request, you have to include full details of your product requirement from your desired length to required number of bars . Whether you’re looking for stainless, carbon, alloy, titanium, nickel, or alloy with your desired finish and shapes from bars to tubes, we make sure we give the best quality for all your requirements. Please let us know your product description and we will work readily on your quotation.
An existing trade-off between cost-efficiency and weight reduction in automobiles pushed more advancements in making high strength class of steel.Steel plays a very comprehensive role in the automotive industry. Steel has almost made up 65% of an automobile truck – from its exteriors to its interiors. With such an astounding number of demands coming from automotive industries, the production of steel remains on its high peak. The standards set in these large industries for top quality, strength, and cost effectiveness pave way for more advancements in steel crafting.
Steel ConsumptionThe automotive industry is one of the major consumers of steel and up until now, the demand for steels is continuing to rise. This has marked a challenge for metallurgists and metal manufacturers to boost the production of steel to support the rigid requirements coming from large automotive industries.
Steel has been quite a material of choice for almost all types of manufacturing applications – may it be for car parts, turbine engines, chemical plants, hydraulic motors, etc. But concerns pertaining to energy efficiency and environmental friendliness, critical factors are always put into consideration. In vehicles we have today, fuel efficiency and automobile emissions are most sought and targeted. Thus, weight reduction among automobiles is taken into rigid concentration by automakers. This has pushed more challenge to incorporate more ideas on how to come up with cars that are light and eco-friendly.
Steels in Racing VehiclesThere are such kinds of metals and steels used specifically in racing vehicles. As for speed and low density, titanium is best recommended because of its light weight and high strength mechanical properties.
Challenges in Using SteelUpon the manufacturing of automotive parts and components, there are rigid areas that are put into critical consideration. As for automobile manufacturers, one of the most pressing areas in manufacturing is the compliance and adherence to the changing regulations in the automotive sector. This involves matters about environment friendliness, fuel efficiency, and emissions reduction.
With such target, automobile manufacturers sought to make cars lighter to lessen carbon dioxide consumption per hour. This has opened though, a great conflict in steel consumption since metals like aluminum and titanium are best when it comes to light weight and high strength. One of the biggest car brands that has applied this strategy is the Ford’s with their model F-150 pickup truck. This has corresponded to an increased percentage in the contribution of aluminum to automotive manufacturing industries.
Given with good mechanical properties such as high strength and low density, the chances of aluminum leading all metals in the record are likely to increase. However, aluminum is much more expensive than steel. Steels, on the other hand are preferred by some because it’s low cost. Opting for weight reduction but which much less cost spent is preferred by the automotive manufacturers. A goal which has stimulated ideas for innovations in coming up with highly advanced high strength class of steels.
Are you looking for high strength steels or aluminum upon your manufacturing process? Get our Free Quote now!
Steel offers a major contribution to the production of heavy duty and highly competitive military advancements and infrastructure for national security and defense.Military defense has gone very robust and highly competitive (especially in the construction and structure of their defense weapons and gears) with the new technologies and advancements made in steel boosting and metalworking. The production and construction of heavy duty and advanced military applications have undergone a critical and thorough selection and evaluation of steels and metals that can withstand across extensive range of extreme temperatures and conditions. Steel materials have been forged into high strength steels due to the demand of users and manufacturers looking for good mechanical properties such as toughness and yield strength, as well as good welding and fabrication properties. The use of steel and other related materials are very extensive. Hundreds of manufacturing industries from different areas have thousands of men working for the production of high-quality but cost-effective materials in wide range of military applications. These include aircraft carriers, armour plate for tranks, Patriot and Stringer missiles, nuclear submarines, military aircraft, and field artillery pieces. Steel is used widely in the US, recognizing it as a very strategic material that had strengthened their existing infrastructure and installations.
- USS New York (stands for both “United States Ship” and “United Star Ship”) was a very example of steel major contribution in military defense. It was made up of almost 24 tons of recycled steel reclaimed from the World Trade Center.