Advantages of Ground Metal

round ground metals

Humans have been looking for new ways to produce, refine, and use round ground metals since the early Bronze Age. Thousands of different sorts of round ground metals as well as grades offer various uses and applications that are simply limited by human imagination. Round ground metals have aided the progress and development of not only our society yet civilisation overall, as they are the cornerstone of many businesses and the origin of Industrialization. Every day, we are surrounded by a minimum of 80 distinct types of round ground metals, from infrastructure to everyday appliances. The six metals listed below are the most commonly used around the world. We’ve looked at the advantages and disadvantages of these metals, as well as their potential uses.

Carbon Steel

round ground metals

It’s a steel alloy composed primarily of carbon and iron, with minor amounts of other metals. Depending on the proportion of carbon in the alloy, it is typically divided into 3 groups: high, medium and low carbon steel. Carbon steel round rod contains a higher carbon content than other forms of steel when compared to iron. The most popular yet cost-effective type is a low carbon steel round rod. It has a carbon content of 0.05–0.320 per cent.

 

Advantages

The greater carbon content gives it more overall strength and makes it ductile and malleable.

  • Medium carbon steel round rod has a carbon content of 0.30% to 0.59% and combines ductility, toughness, and wear resistance.
  • High-carbon steel round rod contains carbon content of 0.6% to 0.99% and is extremely strong.
  • Ultra-high carbon steel has a carbon content of 1.0% to 2.0%, and it could be treated to a higher strength.

Disadvantages

  • Low carbon has a yield-point runout.
  • The tensile strength of mild steel is fairly low.

Uses

  • Medium carbon can be used in the manufacture of large parts, forgings, and automobile parts.
  • High-strength cables and springs are made of high carbon.
  • Knives, axles, and punches are some of the applications of ultra-high carbon steel.

Aluminium

round ground metalsIt’s the most prevalent nonferrous metal on the planet, and it’s noted for its ductility and potential to make alloys with practically any other metal.

Advantages

  •  Aluminium round bar stock has the advantages of being a comparatively soft, robust, lightweight, malleable, and ductile metal.
  •  It is a good electrical and thermal conductor, as well as a corrosion-resistant metal.
  • It’s fully recyclable without losing any of its inherent properties, and it’s also very harmless.

Disadvantages

  •  Aluminium round bar stock is not robust, and it is more expensive than steel alloys of equal strength.

Uses

  • Aluminium round bar stock is most often alloyed to enhance its properties.
  • It is widely used for construction, packaging and transportation industries.
  • It has a wide range of uses, from containers to home appliances to aeroplanes.

 

Bronze

round ground metalsIt is an alloy that is composed of tin and copper with minor amounts of other metals like aluminium, silicon, phosphorus and manganese.

Advantages

  • It’s a hard metal that does not bend or shatter and is proven to withstand fatigue.
  • It outperforms most steels in terms of corrosion resistance as well as solid electrical and thermal conductivity.

Disadvantages

  • Bronze is weaker, softer and much more costly than steel.

Uses

  • Bronze is commonly used in springs, bushings, pilot bearings, and is very common in small electrical motor bearings.
  • It can also be used for the production of church bells, electrical connectors, reflectors and ship parts.

Nickel

round ground metalsNickel is among the world’s most commonly utilised metals. It is classified as a transition metal. It is valued as it produces various alloys, with nickel-steels accounting for nearly 60% of global production.

Advantages

  • It is robust, ductile, and corrosion-resistant due to its slow rate of oxidation at normal temperatures.
  • Nickel increases corrosion resistance under certain conditions and improves the ductility of stainless steel bar stock.
  • At room temperature, it behaves magnetic and has a high melting point.
  • The presence of nickel allows stainless steel bar stock in becoming a useful alloy.

 

Disadvantages

  • Handling nickel may cause dermatitis symptoms in people who are allergic to nickel.
  • High nickel presence in the air can lead to a variety of health problems.
  • Uses
  • Stainless steel bar stock, alnico magnets, rechargeable batteries, coins, strings of electrical guitar, microphone capsules, other specific alloys are all made with it.
  • It’s also utilised as the green tint on glass and also for plating.

Uses

Stainless steel bar stock, alnico magnets, rechargeable batteries, coins, strings of electrical guitar, microphone capsules, other specific alloys are all made with it.

It’s also utilised as the green tint on glass and also for plating.

ZINC

round ground metalsStainless steel 303 round bar has the most machinability among all the grades of austenitic stainless steel. It is machinable as the sulphur is present in the composition of the stainless steel 303 round bar. Sulphur enhances machining while reducing corrosion resistance and toughness slightly. Stainless steel 303 round bar has a lower corrosion resistance than 304. stainless steel 303 round bar is available from advance grinding.

Advantages

  • From 212 to 302 ℉, zinc is malleable and ductile, making it comparatively easy to deal with.
  • It is noted for its strong corrosion resistance and ease of maintenance, as well as being a good thermal and electrical conductor.
  • It has high durability of almost 50 -100 years.
  • Zinc is eco-friendly since it is 100% recyclable.

Disadvantages

  • In comparison to aluminium and steel, it is much more costly.
  • Zinc in its purest form can not withstand air, therefore, it tarnishes extremely quickly.
  • It’s a weaker metal with a tensile strength of less than 50% of that of medium carbon steel.

Uses

  • Zinc has been used for coating and protecting other metals and to prevent galvanised steel from rusting.
  • It’s also useful in the industrial, medical and marine fields, and also the hardware, electronics, and transportation industries.

Titanium

round ground metalsIt is a silver-coloured transition metal with a glossy sheen. It is the 9th most prevalent element that is 0.63 per cent by mass and the 7th most common metal found in Earth’s crust.

Advantages

  • Titanium has the best specific strength ratio among any metal and is highly resistant to corrosion.
  • It’s equally strong like some steels; however less dense when unalloyed.
  • It’s valuable as refractory metal because of its comparatively high melting point.
  • It also has a low thermal and electrical conductivity and is paramagnetic.

Disadvantages

  • Extracting titanium out of its numerous ores is expensive and time-consuming.
  • The casting of titanium alloys is also expensive.

Uses

Titanium could be alloyed using a variety of metals, including iron, vanadium, molybdenum and aluminium, to create lightweight, strong alloys.

  • Golf clubs, bicycles, crutches and laptops are all examples of where they’re used.
  • These are also employed in a variety of industries, including aerospace, military, manufacturing sectors, automotive, medical, sporting and agri-food.

If you're looking to buy metals, you've come to the right place

Advance Grinding offers a range of materials such as aluminium round bar stock, carbon steel round bar, and stainless steel bar stock that could be used in your upcoming project. Call us today or request a quote, and our expert team will gladly assist you in choosing the right type of metal.

Steel Purchaser

PHONE

Email