11L17 steel suppliers

11L17 Carbon steel is a low-carbon, high manganese-content steel known for its good hardenability and surface finish.

11L17 steel suppliers

This carbon steel is made with an addition of lead and manganese into its content thus increasing its hardenability and machinability without compromising its carburizing properties.

Notably, 11L17 Steel readily responds to heat treatments and carburizing methods but can only handle moderate cold working.

As such, Advance Grinding Services knows how to handle 11L17 steel with our sophisticated grinding and machining operations and will readily provide you with 11L17 carbon steel round bar stock when you need it!

Carbon Round Bar Purchaser

HIGH MECHANICAL PROPERTIES, HIGH MACHINABILITY

Concentrating on the fact that the 11L17 steel has an added lead and manganese, these additions increase its hardenability and machinability.

However, due to its high sulfur content and the added lead, most industries don’t use 11L17 carbon steel bar stock if a lot of the intended applications involve welding.

11L17 CARBON STEEL COMPOSITION

PHYSICAL PROPERTIES11L17 DATA
Density0.284 lb/in³
MECHANICAL PROPERTIES11L17
Tensile Strength68900 psii
Yield Strength58000 psi
Hardness (Brinell)137
Hardness (Knoop)156
Hardness (Vickers)143
Elongation at break (in 50 mm)15%
Elastic modulus27557-30458 ksi
CHEMICAL PROPERTIES11L17 (%)
Carbon0.14-0.20
Iron98.33-98.78
Manganese1.0-1.30
Sulfur0.080-0.13
Phosphorus0.040

11L17 CARBON STEEL APPLICATIONS

A 11L17 steel bars are commonly used for the manufacture of parts that are subjected to shock or vibrating stresses. As such, it is only appropriate that this type of carbon steel works well in automotive and aerospace applications. To elaborate, 11L17 carbon steel bars are used in the creation of carburized parts requiring a softcore and high surface hardness such as kingpins, gears, pinions, and ratchets.

11l17 carbon steel is a type of structural steel that is used in the construction of bridges, buildings, and other structures. The steel bar is a common type of steel used in construction. It has a low carbon content and can be used to make all types of steel products. 11l17 carbon steel is a type of steel that has a carbon content of 0.11%.

Moreover, 11l17 carbon steel has a high strength-to-weight ratio and can be used to make knives with an edge hardness of 57-62 HRC. The 11l17 carbon steel bar has a low carbon content compared to other types of structural steel. Because of this low amount of carbon, it is resistant to corrosion and oxidation.

For all your carbon steel needs, Advance Grinding Services can provide it for you!

With our extensive in-house stock of steel, rest assured we will always have 11L17 carbon steel bars for your designated applications.

Give us a call and request a quote from us today

PHONE

Email